FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
1155432B-it,en,de.doc
– 21/07/2010
24
The equipment was built for the treatment of not
explosive materials. it’ is forbidden to use
this machine with flammable or explosive vapours.
Warning:
Avoid to operate the Ferraris Mixer without a clamped load.
Never use a load with a weight over 40 Kg.
Don’t switch-off the machine with the can inside.
Do not place any
damaged packaging
in the Ferraris Mixer.
Further rupture during mixing may cause damage to the Ferraris Mixer
Running the Ferraris Mixer with damaged packaging is at "User's" risk.
Already damaged packaging may cause damage to the your machine.
During the maintenance respect the security rules and the procedure described in its paragraph.
The Ferraris Mixer is to be operated only by trained personnel. FAST & FLUID MANAGEMENT shall not be liable for
any damage or injury caused by non - compliance with the "user"- and "safety" - regulations presented in this manual,
or by not taking the usual and accepted precautions in handling, operation or repair, even if not expressly stated in
this manual.
This is also valid for damage and/or accidents as a result of changes made to the machine, that are implemented without
prior notice to and approval by FAST & FLUID MANAGEMENT Srl.
RESIDUAL RISK
Residual risks list for the operator
Even if all attentions have been paid during the designing of the machine to guarantee a safety use it is possible to find situations
rationally foreseeable for which it has been possible only to reduce the risk but not to eliminate it completely.
RISK
DIRECTIVE 392
PRECAUTION
Injuries or crushing during loading and
unloading operations
1.6.4
4.1.1
Use security protective gloves and shoes during loading and
unloading operations
Abrasions and injuries caused by sharp
edges and parts of the cans to use
1.6.4
4.1.1
Use protective gloves during loading and unloading
operations
Liquid leakages from the cans
Clean carefully the area where the operator works.
Residual risks for the maintenance people
RISK
DIRECTIVE 392
PRECAUTION
Danger of electrocution during the setting
phases of the inverter
1.5.1
1.5.2
Use security shoes.
Position protective screen for the dangerous terminal blocks
Personal protection for user
If the equipment is used in a correct way , the machine does not present risks or dangers for the operator , which in any
case has to wear individual protection devices (security glasses, anti-sliding shoes, protective gloves ) specially during
the loading and unloading phases of the cans.
General danger situations
There aren’t any particular danger situations ( E.G.. Fire risk, issue/ dispersion of dangerous products) but in any case it is
necessary to have a powder extinguisher for possible fire situations. (electrical equipments).
