3
COMPREHENSIVE
MANUAL
TECHNICAL SPECIFICATIONS
WARNING
The power adaptor allows you to disconnect the device. The power source
should be close to the device and easy to access. Switch off the handset where
mobile use is prohibited or when it may cause disturbance or danger.
Never use the telephone while driving. Switch off on aeroplanes, in hospitals or
near medical equipment, in petrol stations and other areas near explosive goods.
Do not use batteries of different capacity to the original batteries,
do not immerse the handset or any of its components in water and do not
expose them to fire or extreme temperatures. Waste material generated when
the device and its components are discarded should be treated in accordance
with regulations in force and not like normal waste. When you wish to discard
the handset or its components, take them to your nearest electrical/electronic
waste management centre.
DIAGRAM
ICONS AND FUNCTIONS
IM200
FREQUENCY
800/1800 MHZ / QUADBAND
DISPLAY
TFT 1.77” COLOR
SPEAKER
<_
100dB
STANDBY TIME
+_
375/240 HRS.
TALK TIME
+_
3/5 HRS.
CALL RECORDS
20
MEMORY CARD COMPATIBILITY
<_
16GB
CONTACTS
100
SMS ARCHIVE
50
CHARGER
100-240V~50/60 Hz 150mA 5.2V 500mA
BATTERIE
Li-ION 3.7V 700mAH
10
2
5
6
1
1
6
2
7
3
8
4
9
5
10
3
4
7
8
9
TFT Screen
Direct memory 1
Direct memory 2
Call/Pick up
Reject / Hang up
Keypad
Mute/General mode/Select text
input mode
SOS Button
Torch ON/OFF
Unlock
DIRECT MEMORY 1
DIRECT MEMORY 2
SILENT MODE
BATTERY LEVEL
CALL/ACCEPT
HANG UP/REJECT CALL
SOS BUTTON
LOCK/UNLOCK
BROWSE/UP: READ MESSAGES
BELOW: ALARM SETUP
SWITCH OFF/ON THE TORCH
SIGNAL STRENGTH
MISSED CALLS
SOUND AND VIBRATE
SOUND ONLY
VIBRATE
HEADPHONES CONNECTED
LOCKED
UNLOCKED
ALARM ON
NEW SMS
MEMORY CARD
DETECTED
SILENT MODE
IMPORTANT: Switch off the handset and disconnect the charger before
removing the battery cover.
INSTALLING THE FLASH MEMORY CARD:
Take off the back cover of the IM200
and remove the battery. Insert the memory card in the slot underneath
the SIM card compartment and ensure that the metal contacts on the card are
facing downwards. Please take care not to scratch or bend the metal contacts on
the card.
The Flash memory card is used as storage for the telephone. You can copy files
onto the card when you connect to a computer via USB.
Take off the back cover of the IM200 and remove the battery.
INSTALACIÓN
When you press the Menu key, the first option you will see is CONTACTS.
1.SEARCH
Under this option, once you have saved contacts, press
SEARCH
to quickly
locate a contact using the first letter of their name.
2.ADD NEW CONTACT
You can add a new contact to the SIM (card) or the handset and press Accept
to confirm.
1.Insert contact name and number.
2.Where you choose to save the contact on the telephone, you will also be able
to assign an image and ringtone to that contact. The image can be taken from a
file or from the camera itself. To select the image location
use the * and # keys to scroll to the right and left.
Select the desired location and press
Option
to choose.
3.You can keep the default ringtone or choose a new one. The ringtone can be
selected from a file or from pre-set handset ringtones. Use the * and # keys to
scroll right and left respectively to select the location of the Ringtone. Select the
desired location and press
Option
to choose
4. Press Option to save.
CONTACTS
Press Menu and scroll to SETTINGS
1.SOS
STATUS: You can select the status (on/off). The status must be “on” to work
properly.
SOS NUMBER: Set up the numbers that the SOS button will dial when pressed.
These calls will be made in the order in which the telephone numbers are
inserted.
SOS STATUS: Set up the status of the SOS message (activated or deactivated),
to be sent to the pre-inserted numbers.
SOS SMS: Insert the text of the SMS to be sent to the pre-inserted numbers.
If the function is on, when you press the SOS button on the back of the device, the
telephone will emit an emergency tone and will call the five pre-saved numbers.
Warning!
The SOS function must be activated prior to use. Occasionally interference
from other sources (Internet, environment etc.) may mean that the SOS
function is not available.
2.TELEPHONE
DATE AND TIME: Select the Time Zone, Date and Time and the Format in which
you would like date and time to be displayed. You can also choose whether you
would like the time to update automatically with the time zone.
LANGUAGE: Press Accept and use the up/down keys to select the language you
want.
DEFAULT INPUT METHOD: Press Accept and uses the up/down keys to select
the default text input method.
SCREEN: In this menu you can change the system wallpaper and personalise it.
3.PROFILES
Scroll to select available modes
General/Silent/Conference/Outside.
After selecting the mode, you can personalise each one by selecting
Option
:
· Alert type (sound only, vibrate only or vibrate and ring)
· Type of ringtone (Repeat, ascending, beep once)
· Incoming call (ringtone)
· Ringtone volume
· SMS vol.
· Audible keyboard (Silent, Clicking, Sound, Human voice)
· Volume Key
· Ringtone On
· Ringtone Off
· System Alert (On/Off)
Pressing the # key, changes the mode to
Meeting.
4.SPEED DIAL
M1/M2 KEY: Allows you to call pre-assigned contacts by pressing M1 and M2.
Status:
The default status is ON. Press
Accept
to change it.
Number:
Press
Accept
to input the numbers M1 and M2.
KEYS 2-9: You can set the status (on/off) and assign a contact to each number
(from 2 to 9). Once you’ve done this, when you dial these numbers, the phone
will call the relevant assigned contact.
Status:
The default status is OFF. Press
Accept
to change it.
Number:
Press
Edit
to select to the contact from the list of Contacts and press
Accept
to confirm.
5. LOCK MODE
Scroll to choose the feature that you want to disable and press
Accept
.
The disabled feature will disappear from the main menu.
6.CHANGE PRESET KEY SETTINGS
UPPER KEY: The upper key is by default for the Messages menu. It can be
changed to cover
Contacts, Calls, Calendar, Camera, Multimedia, Contact
Photo, FM Radio or Bluetooth.
LOWER KEY: The lower key is by default for the Contact Photo menu. It can be
changed to cover
Contacts, Calls, Calendar, Camera, Multimedia, Messages,
FM Radio or Bluetooth.
7.NETWORK
NETWORK SELECTION: You can look for and select a network manually, as well
as changing the network selection method (automatic/manual).
8. SECURITY
SIM SECURITY: You can use this menu to ACTIVATE/DEACTIVATE the Pin Lock
and change the PIN code.
TELEPHONE SECURITY:
You can use this menu to ACTIVATE/DEACTIVATE the
handset lock and change the passcode. The default passcode for the handset is
“0000”.
AUTO-LOCK: Allows you to choose the amount of time that elapses before the
handset locks automatically.
9. RESTORE DEFAULT SETTINGS
Restores factory settings on the handset. The default passcode for the handset
is “0000”.
Press Menu and scroll to MULTIMEDIA.
1. FM RADIO
Use the
up/down arrows
to select to the channel and the */# keys to adjust the
volume.
Press the
Hang up
key to return to sleep mode. The radio will stay on.
Press 0 to switch the FM radio on/off.
Pressing
Option
allows you to
Edit
the radio stations (Name and frequency),
and
Save
them, or press
Dial
to input a frequency manually. You can also do an
Auto-Search
and save the frequencies
to listen to them later.
2. CAMERA
Press the
0+
key to take a photo.
To view photos press
Option
and
select
Photos.
Pressing
Option
also allows you to
Change the camera settings
(Shutter release
sound, EV, contrast, anti-blink mode, timer, continuous shooting),
Change
image settings
(size and quality),
white balance, scene mode, camera effects,
storage
(SIM Card or telephone) or
Restore default settings
.
Warning! If the capacity of the memory card is insufficient, delete a document
or increase memory card capacity.
3. SOUND RECORDER
*You need to insert a memory card in the handset before using this function.
a)To start a new voice recording press
Option
and select “
new
recording
”, in the
Menu/Multimedia/Recording section
b) Press “
stop
” to stop and save the recording.
c)If you wish to cancel a recording without saving it, press the
M2
button.
To listen to recordings, go to
Menu/Multimedia/File
manager and select the
SETTINGS
MULTIMEDIA
3.CONTACT PHOTO
NAME: Insert name
NUMBER: Insert number
CALLER PHOTO: Press
Option
, then
Select
image source (Default, camera or
file) and assign a photo to the contact. The photo will appear every time you
make a call to or receive a call from
that contact.
*Use a 240x320 pixel image to optimise display.
RINGTONE: Press
Option
, then
Select
the ringtone and then select
OK
to assign the ringtone to the contact.
Press
Option
and scroll to
Save
, then press
Select
to save changes.
4.CONTACT SETTINGS
FAVORITES : Choose whether new contacts will be saved by default on the SIM
card, on the mobile handset or in the location specified each time a new contact
is added (both).
STORAGE : Allows you to check how many contacts are saved on the SIM card
and on the handset.
COPY CONTACTS: Copies contacts to the SIM card or to the handset. MOVE
CONTACTS: Moves contacts to the SIM card or to the handset.
DELETE ALL: Deletes all contacts from the SIM card or the handset.
INSTALLING THE SIM CARD:
Insert the SIM card in to the SIM card
compartment above the memory card slot (ensure that the side of the card
containing the metal contacts
is facing inwards).
Switch off the mobile before removing the SIM card. *Use of MicroSIM cards
with an adaptor is not recommended.
INSERTING THE BATTERY:
Remove the battery cover, insert the battery into the
battery compartment and replace the cover.
The first time you use the handset please drain the battery completely and then
charge it for 4 hours to optimise battery life.
