R&D
Access Touch 2.0 – User Manual
Version 1.03
Public
8 (12)
Author: Hal
File: C00320E
Date:
18.8.2012
Approved:
Jpo
Printed:
20.08.2012
09:45
Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel +358 20 743 4175 | [email protected] | www.idesco.fi
Picture 5: Connector 4
5.2.5.
Connector 5
Connector 5 includes two general purpose inputs. GND and +12 VDC may be connected to an exter-
nal power source.
By default these two inputs are in “high” state. Their state reverts to “low” upon being grounded.
Consult the separate Access Touch 2.0 Protocol Description for more information about these input
controls.
Picture 6: Connector 5
5.2.6.
Ethernet Connection
Access Touch 2.0 possesses one Ethernet connection. This device supports the 10 / 100 Mbit
Ethernet protocol.
Consult picture 2 to locate the Ethernet connection.
5.2.7.
USB Ports
Access Touch 2.0 has two USB ports for external USB device connections. The available USB ports
are located in the USB1 connector. USB2 is reserved for connecting a touch sensor. USB3 is not
available.
See picture 2 in chapter 5.2 for USB connection locations.
