Product specifications, parameters, functions of the device can change without notice!
14
IDENTIVISION IP NVR INSTALLATION GUIDE
2.8 Turn on
Connect with power, turn on the switch at the back panel, the indicator is on, then DVR was turned on. After
starting up, you can hear a beep, the default output mode is multi-window mode. Remark: Restart the power
after the abnormal power off, DVR will automatically recover the state before power off.
Note:
Make sure that the input voltage corresponds with the switch of the DVR power supply.
Power supply demands: 220V±10% /50Hz.
Suggest using the UPS to protect the power supply under allowable conditions.
2.9 Turn off
There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the
system] option is called soft switch. Pressing the power supply switch is called hard switch.
Illumination:
2.9.1 Auto resume after power failure
If the DVR is shut down abnormally, it can automatically backup video and resume previous working status
after power failure.
2.9.2 Replace the hard disk
Before replacing the hard disk, the power supply switch in the real panel must be turned off.
2.9.3 Replace the battery
Before replacing the battery, the setting information must be saved and the power supply switch in the real
panel must be turned off. The DVR uses button battery. The system time must be checked regularly. If the
time is not correct you must replace the battery, we recommend replacing the battery every year and using
the same battery type.
Note:
The setting information must be saved before replacing the battery otherwise information will lose.
