Page 45
Update Period:
The same with the NTP server check interval. Default: 10minutes.
【
EMAIL setup
】
If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm
information and the photos to appointed address.
Picture 4.21 EMAIL
Snapshot and Email Setting procedure Refer to chapter Appendix 5. on the page 74.
SMTP server:
Email server address. It could be an IP address or domain name. Domain name can
be translated only it is the correct DNS configuration.
Port:
Email server port number.
SSL:
Decide whether using Secure Socket Layer protocol to login.
User Name:
Apply the email server user name.
Password:
Input the password corresponding to the user.
Sender:
Set the email sender address.
Receiver:
Send the email to appointed receivers when the alarm is turned on. You can set three
receivers at most.
Title:
You can set as you wish.
【
IP Filter setup
】
When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed
are supportive in the list.
Summary of Contents for ICR-E42-83-163
Page 1: ...Page 1 Identivision ICR E42 83 163 Installer Manual EN ver 1 2...
Page 74: ...Page 74 Weight 3kg without hard disk Installation Desktop...
Page 79: ...Page 79 Appendix 8 FTP Setting 12 14 minutes long videos...
Page 80: ...Page 80 Service LDSZ Kft 1117 Budapest N dorliget u 7 b www identivision hu en...
