Identiv CLOUD 3700 F Reference Manual Download Page 7

Page: 7 / 82

Reference Manual for the CLOUD 370x F Contactless Desktop Readers

Document Version 1.0

Last revised on 2014-07-22

Page 7 of 82

1.3:

Software Licenses

Where this document contains source code examples, they are provided for illustrative purposes only

and are subject to the following restrictions:

•

You may at your own risk use or modify the source code provided in this document in

applications you may develop. You may distribute those applications ONLY in the form of

compiled applications.

•

You may NOT copy or distribute any portion of the source code without prior written consent

from Identiv.

•

You may NOT combine or distribute the source code provided in this document with Open

Source Software (or with software developed using Open Source Software) in a manner that

subjects the source code or any portion thereof to any license obligations of such Open

Source Software.

If the document contains technical drawings related to Identiv products, they are provided for

documentation purposes only. Identiv does not grant you any license to its designs.

1.4:

Trademarks

MIFARE

is a registered trademark of NXP Semiconductors BV.

Windows is a trademark of Microsoft Corporation.

Summary of Contents for CLOUD 3700 F



















































































Search results

Summary of Contents for CLOUD 3700 F

Reviews:

Related manuals for CLOUD 3700 F

Brands by name

Popular brands

Identiv CLOUD 3700 F, Reference Manual

Search results

Summary of Contents for CLOUD 3700 F

Reviews:

Related manuals for CLOUD 3700 F

Brands by name

Popular brands