identités ZERO 825034, Instruction Manual

Page: 17 / 34

Version Mai 2023 17
- If you install the rear wheel kit in hole 1, the brake will not
work and the rear wheel cannot be mounted properly.
- If the brake does not work, check this step.
Install the plastic wheel handle on the rear wheel and use the special spanner to tighten the axle.
Install the footrests. Check the orientation against the illustration. Release the lock to allow the footrests to be
adjusted. Lock the lock when the footrests are in position.
* There are 4 levels of adjustment
for the footrests.
Wheel handle
Tightening spanner
Rotate the wheelchair after
installing the 4 wheels