IDENTEC SOLUTIONS 455361, Hardware User Manual

Page: 4 / 16

i-B350L -CC
– Hardware User Manual | 20. September 2019
Copyright © 2019 IDENTEC SOLUTIONS. All rights reserved.
4
WARNING
-
This product should be installed by personnel trained in installation of
equipment in industrial environments
and meet the representative country’s
National Electrical Code.
Electrostatic Discharge
This product contains components that are sensitive to electrostatic discharges. Please observe
the special instructions for their protection. Incorrect handling can damage the unit and cause
the invalidation of the warranty.
Minimum safety precautions against electrostatic discharge:
 Establish earth contact before you touch the unit. (For example, touch the earthing screw on the unit.) Best
practice is to use an antistatic ribbon and earth yourself permanently for the time you handle the unit.
 Avoid unnecessary contact with the unit connectors and assemblies inside the unit.
 Only open the unit if the operational settings (as described in the manual) expressly requires it.

Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools).
 Do not store unit and components without protective packaging.
 Remove unit and components from the packaging only prior to installation.
These notes are not sufficient to guarantee complete protection from electrostatic discharges! We
recommend the use of suitable protective equipment.
IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD
precautions and protective packaging materials were not followed.