v
BLASTING CAPS AND AREAS
To avoid possible interference with blasting
operations, turn off your radio product when you are
near electrical blasting caps, in a blasting area, or in
areas posted: "Turn off two-way radio". Obey all signs
and instructions.
FOR VEHICLES EQUIPPED WITH AN AIR BAG
An air bag inflates with great force. DO NOT place
objects, including communication equipment, in the
area over the air bag or in the air bag deployment area.
If the communication equipment is improperly
installed and the air bag inflates, this could cause
serious injury.
Installation of vehicle communication equipment
should be performed by a professional installer/
technician qualified in the requirements for such
installations. An air bag’s size, shape,and deployment
area can vary by vehicle make, model, and front
compartment configuration (for example, bench seat
vs. bucket seats).
Contact the vehicle manufacturer’s corporate
headquarters, if necessary, for specific air bag
information for the vehicle make, model, and front
compartment configuration involved in your
communication equipment installation.
DAMAGED ANTENNAS
Do not use any radio product with a damaged antenna.
If a damaged antenna comes into contact with your
skin, a minor burn can result.
CLEANING INSTRUCTIONS
Clean the external surfaces of the radio product with a damp
cloth, using a mild solution of dishwashing detergent and
water. Some household cleaners may contain chemicals that
could seriously damage the radio product. Avoid the use of
any petroleum-based solvent cleaners. Also, avoid applying
liquids directly on the radio product.
!
W A R N I N G
!
!
C a u t i o n
OPERATIONAL
WARNINGS
OPERATIONAL
CAUTION
