IDEMIA DOCUMENT
– REPRODUCTION AND DISCLOSURE PROHIBITED.
17
Configuration using MorphoBioToolbox
Fill IP address and Network mask following
previous paragraph recommendations.
Even if not used, fill Gateway, Preferred and
Alternate
DNS
values
(using
1.1.1.1
for
example).
Click on
“Write Usb Script” button and save it
on USB key.
Plug USB key to the terminal using the
adaptor.
A high pitched beep, followed by purple led panel
blinking and high pitched beeps and green led
panel will indicate configuration is finished
First communication with terminal (2/2)
MorphoAccess® VP MD
– Quick User
Guide - 2019_2000041669-V1
General remark for network configuration
If terminal is connected to local network without DHCP server, be sure to configure the following
parameters :
Administration PC and all terminals shall have a different IP address (Host PC IP address with any IP
address within 192.168.x.x range excluding 192.168.1.10).
Administration PC and all terminals shall have the same network mask (ex : 255.255.255.0 if the 3 first
bytes of IP address are the same for all terminals and PC).
St
ep
fiv
e:
Adm
inis
trat
io
n
