Non-Contact RFID Locking Safety Switches
Switch Status
Guard
Green LED
Yellow LED
Locked
Closed
Steady
Off
Solenoid Power OFF (unlocked)
Closed
Flashing
Off
Guard Open
Open
Off
Steady
Door Forced Open
Open
Off
Flashing
Quick Connect (QC)
250mm (10”)
M12 8-Way
Male Plug
Conductor
Colours
Function
Power
Ratings
3
Blue
Supply 0Vdc
50mA max.
2
Red
Supply 24Vdc
8
Orange
Lock Applied (24Vdc)
500mA max.
7
Black
Safety Output 1
200mA (max. switching)
1
White
Safety Output 1
4
Yellow
Safety Output 2
200mA (max. switching)
6
Green
Safety Output 2
5
Brown
Auxiliary Signal
+24Vdc
MGL-1 Switch Dimensions (mm) (Heavy Duty)
Connection Colours
IDEM SAFETY SWITCHES Ltd., 2 Ormside Close, Hindley Industrial Estate, Hindley Green, Wigan, WN2 4HR UK. Tel: +44 (0)1942 257070 Fax.: +44 (0)1942 257076
IDEM (USA), 4416 Technology Drive, Fremont, CA 94538 Tel:510-445-0751 Fax:1866-431-7064 email:
Web:
www.idemsafety.com
Doc: 102557
Aug 17
Standards:
ISO14119 EN60947-5-3 EN60204-1
ISO13849-1 UL508
Dielectric Withstand:
250V.ac
Insulation Resistance:
100 Mohms
Switching Distance:
Sao 1mm Close
Sar 10mm Open
Tolerance to Misalignment:
5mm in any direction from a gap of 5mm
Switching frequency:
1.0 Hz maximum
)
Approach speed:
200mm/m to 1000mm/s
Body material:
MGL-*P = Plastic
MGL-*M = Die-Cast Metal
MGL-*SS = Stainless Steel 316
Temperature Range:
-25C to +40C
Enclosure Protection:
IP67/IP69K (Stainless Steel)
Cable Type:
PVC 8 core 6mm OD
Mounting Bolts:
2 x M5 Tightening torque 1.0 Nm
Mounting Position:
Any
Power Supply:
+24Vdc ± 10% (SELV / PELV)
Maximum Switched Current (outputs): 200mA (Minimum internal resistance 8.5 Ohms)
Characteristic Data according to EN ISO13849-1:
Performance Level
e If both channels are used in combination with a
SIL3/PLe control device
Category
Cat4
MTTFd
1100a
Diagnostic Coverage DC
99% (high)
Number of operating days per year:
d
op
= 365d
Number of operating hours per day:
h
op
= 24h
B10d:
Not mechanical parts implemented
When the product is used deviant from these assumptions (different load, operating frequency,
etc.) the values have to be adjusted accordingly.
MGL-2 Switch Dimensions (mm) (Medium Duty)
Pin View from Switch
LED Operation and Switch Status Indication:
The MGL switch uses 2 LEDs to indicate all the different possible switch states.
The LEDs are in a clearly visible location at either side of the cable exit point.
Actuator Operating Direction:
MGL shown in OPEN position.
Steady Yellow LED indication.
MGL shown in CLOSED position, lock energised.
Steady Green LED indication.
INFORMATION WITH REGARD TO UL508
Type 1 Enclosures.
Maximum temperature 40ºC. Maximum output 24V.dc 200mA.
Powered by Class 2 or equivalent.
WARNING:
Hot surface – risk of burn if used at ambient temperature of +40C degrees.
(Affix a warning label to the switch).
Original Instructions.
To request this data sheet in other languages please contact
Um dieses Datenblatt in Deutscher Sprache wenden Sie sich bitte anfordern
Pour obtenir cette fiche en Français, veuillez contacter
Para solicitar esta hoja de datos en Español, por favor contacto con
WARNING: DO NOT DEFEAT, TAMPER, OR BYPASS THE SAFETY FUNCTION.
FAILURE TO DO SO CAN RESULT IN DEATH OR SERIOUS INJURY.
AVERTISSMENT: NE PAS DESACTIVER, MODIFIER, RETIRER, OU CONTOURNER
CETI INTERVERROUILLAGE IL PEUT EN RESULTER DES
BLESSURES GRAVES DU PERSONNEL UTILISATEUR.
