Emergency
numbers
You can set up to four emergency (SOS) numbers, each
with up to ten digits. These numbers can always be
dialled using any handset, even when call barring is
turned on. Emergency numbers 1 and 2 are preset as
999
and
112
.
1
Select the
CALL CONTROL
option then press
the
â
button THREE times
è
The display shows
EMERGENCY NUMBER
2
Press the
PHONE/OK
button
è
The display shows
EMERGENCY NUMBER
SOS NUM
and
1
,
2
,
3
or
4
3
If necessary, use the
â
or
á
button to go to
the number you want
(For example, you may want to leave numbers
1 and 2 as they are, and set a new emergency
number as number 3.)
4
Press the
PHONE/OK
button
è
The display shows
ENTER SOS NUM 3 *
(for
example) and any number that is already set.
5
Key in the new emergency number and
press the
PHONE/OK
button
è
The display goes back to
EMERGENCY
NUMBER
and you can set another emergency
number if you wish.
Base unit settings
42
Troubleshooting
!
The iDECT X1 must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
ALWAYS check
first that:
■
you have followed all the steps listed on pages 5 to 7
to install and set up your iDECT X1
■
all
connectors
are firmly inserted in their sockets
■
mains power
is switched on at the socket
■
the handset’s
batteries
are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
If the handset’s display is blank, it may be
switched off
.
Press the
HANG UP
button to switch it back on.
Check that the base unit’s
mains power adapter
is
plugged in and
power is switched on
. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the
telephone line cable
that
was supplied with your iDECT X1. Other telephone line
cables might not work.
Move the handset
closer
to the base unit.
Check the
Battery Level
symbol on the display. If it’s
low, replace the handset on the base unit or charger
pod to recharge the batteries.
If
auto-answer
is turned off (page 32), you need to
press any button (except
HANG UP
) on the handset to
answer an incoming call. Turn auto-answer on if you
want to answer calls by simply lifting the handset from
the base unit or charger pod.
Switch off power
at the mains socket, wait for a few
seconds and then
switch back on
. This may help.
Help Line:
0845 345 9677
(Local Call rate)
43
E:\Binatone2005\iDECT_X1\iDECT_X1_UK_draft02a.vp
25 August 2005 16:47:49
Color profile: Generic CMYK printer profile
Composite Default screen
