iDect FC6A series, User Manual

Page: 32 / 474

2: P
RODUCT
S
PECIFICATIONS
2-4 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722
(16) Serial Port 1
This port allows serial communication with connected devices that are equipped with a serial interface (RS-232C or RS-485).
(17) Ethernet Port 1
This port allows Ethernet communication with connected devices that are equipped with an Ethernet interface.
(18) ACT LED
This LED flashes when sending or receiving data while the LINK LED is on.
(19) LINK LED
This LED is on when a network-compatible device is connected to Ethernet Port 1.
(20) Power Supply Terminals
These terminals are used to supply power to the CPU module.
The AC power type uses an AC power supply (100 to 240 V).
The DC power type is available as the 24V DC power type and the 12V DC power type.
(21) USB Port
A mini-B type USB 2.0 connector. A USB cable can be attached to the FC6A Series MicroSmart and connected to a PC to
download and upload user programs using WindLDR.
(22) SD Memory Card Slot
This slot is for inserting the SD memory card. The SD memory card allows for data logs using the DLOG/TRACE instructions,
reading and writing device data, downloads from the SD memory card (user program, system software, web page), and
uploads to the SD memory card.
(23) Communication Connector
This connector is used to connect the HMI module.
(24) Function Switch
This switch turns M8073 on or off (default setting: 0 (off)).
You can run or stop the CPU module with this switch by enabling
Run/Stop PLC by Function Switch in WindLDR (default
setting: enabled).
For details on the function switch, see Chapter 5 "Function Switch Configuration" on page 5-9.
(25) Analog Input
The connector for the analog input.
(26) Analog Volume
A volume for setting a timer or other device. This allows an analog value used in the user program to be set without the use
of an external device.
(27) SD Memory Card Cover
An openable cover that protects the SD memory card and function switch. Open the SD memory card cover when inserting
or ejecting the SD memory card and when using the function switch.
(28) Analog Port Cover
A removable cover that protects the analog input and analog volume. When using these, remove the analog port cover.
(29) Dummy Cartridges
Removable dummy cartridges that protect the cartridge slots. Remove the dummy cartridge when connecting an analog
cartridge or communication cartridge.
(30) Expansion Connector Protection Sticker
This sticker protects the expansion connector. Remove the expansion connector protection sticker when connecting an
expansion module.
(31) Serial Port 1 Cover
A removable cover that protects Serial Port 1. When using the serial port, remove the Serial Port 1 cover.
(32) Ethernet Port 1 Cover
A removable cover that protects Ethernet Port 1. When using the Ethernet port, remove the Ethernet Port 1 cover.
(33) Power Supply Terminals Cover
An openable cover that protects the power supply terminals. Open the power supply terminals cover when removing and
attaching the power supply terminals.