IDEC SmartAXIS Touch FT1A Series, Instruction Sheet

Page: 60 / 118

20
● Applicable Standards
*1. When using the Touch as the EMC Standard Approved Products, attach a ferrite core (ZCAT3035-
1330 manufactured by TDK Corporation) to the power cables and the communication cables.
If there a risk of an error occurring due to noise, install the product separated from sources of noise
such as power lines, high voltage lines, and load lines. Also attach a ferrite core to the
I/O cable (ZCAT3035-1330 manufactured by TDK Corporation).
● Environmental Specifications
*2. The UL and c-UL certified operating temperature of the FT1A-*12RA-* is 0 to 50ºC.
●
Electrical Specifications
■ FT1A-*12RA
■ FT1A-*14KA/14SA
5 Specifications
Safety Standard
UL508
CSA C22 2 No.142 (c-UL)
EMC Standard*1 EC/EN 61131-2:2007
Operating
Temperature*2 0 to 55°C: FT1A-M (Monochrome LCD models)
-20 to 55°C: FT1A-C (Color LCD models) (No freezing)
Relative 10 to 95% RH (No condensation)
Storage Temperature -20 to +60°C (No freezing)
Storage Humidity 10 to 95% RH (No condensation)
Altitude
Operation: 0 to 2,000m
Transport: 0 to 3,000m
Pollution Degree 2
Corrosion Immunity Free from corrosive gases
Rated Voltage 24V DC
Power Consumption 9.2W max. When USB2 is unused: 5.8W max.
Power Voltage Range 20.4 to 28.8V DC
Allowable Momentary
Power Interruption
10 msec max.
Inrush Current 50A max.
Dielectric Strength
Between power and FE terminals: 500V AC, 5mA,1 minute
Between power and output terminals: 2,300V AC, 5mA, 1 minute
Rated Voltage 24V DC
Power Consumption 11.0W max. When USB2 is unused: 8.1W max.
Power Voltage Range 20.4 to 28.8V DC
Allowable Momentary
Power Interruption
10 msec max.
Inrush Current 50A max.
Dielectric Strength
Between power and FE terminals: 500V AC, 5mA,1 minute
Between power and output terminals: 500V AC, 5mA, 1 minute