10
SA1E-L Miniature Laser Photoelectric Switches (Built-in Amplifier)
Dimensions
Reflector Mounting Brackets
Connector Cable (connector on one end)
Cable length:
2 or 5m
33.7
ø4.7
ø10
➃
Black
➁
White
➂
Blue
➀
Brown
28.1
18.9
27.2
5°
ø4.7
ø10
➃
Black
➁
White
➂
Blue
➀
Brown
Cable length:
2 or 5m
Straight (SA9Z-CM8K-4S
)
•
Dielectric strength when installed on the SA1E-L: 1000V AC (between live part and mounting bracket, except between live part and tightening ring)
Right-angle (SA9Z-CM8K-4L
)
•
The SA9Z-A02 air blower mounting block
is supplied with two mounting screws
(M3 × 20 mm sems screws), one screw
for plugging the air supply port (M5 × 6
mm), and one gasket (1 mm thick) for
plugging the air supply port.
•
An air tube fitting can be installed to
either the top or side. Tighten the fitting
to a torque of 0.5 N·m maxi mum.
•
The air tube fitting and mounting bracket
are not supplied and must be ordered
separately (recommended mounting
bracket: SA9Z-K01).
All dimensions in mm.
5.8
14.0
8.0
37.0
25.4
25.0
6.9
M5
P0.8
M5
P0.8
(Material: Anodized aluminum surface)
2-ø3.2
(
3.2
)
3.5
19.5
2.0
(
3.
8
)
31.5
Recommended
mounting
bracket (SA9Z-K01)
Air Blower
Mounting Block
10.9
14.0
8.0
3.4
Air supply port
Plugging screws
for air supply port
(M5), Gasket
(used on one
side only)
6.
5
42.5
With Mounting Bracket
IAC-L2 (for IAC-R5)
IAC-L3 (for IAC-R9)
IAC-L5 (for IAC-R8)
Material: SPCC (zinc plating)
42
5.5
19
6
28
37
74
113
2
2-ø3.4
4-ø4.4
30
58
70
60
44
20
1.6
25
16
10
8
6
Material: SPCC (zinc plating)
8-M3 × 0.5 holes
25
4.5
11
10
35
(3)
40
4.5
10
Material: SPCC (zinc plating)
26
12
35
(28)
(3)
20
(2)
61
16
15
18
7
40
50
11
8-M3
×
0.7 holes
Air Blower Mounting Block
SA9Z-A02
