B-1908-1(0)
INSTRUCTION SHEET - HS1L Series
Solenoid Type Safety Switch, Inside Connector type
( 4 / 6 )
2016.08
Contact Configuration and Operating Characteristic
5
Contact Operation
Operating Characteristic (reference)
11-42
61-62
31-32
21-52
11-42
21-52
33-34
63-64
Approx.
30.0
61
62
31
32
21
22
63
64
34
33
Approx.
10.0
22
21
41
42
12
11
11
12
42
41
(-)
(+)
A2
A1
Door monitor Lock monitor
HS1L-DQ
□
HS1L-DT
□
Monitor Circuit :
Monitor Circuit :
Main Circuit :
Main Circuit :
Main Circuit :
Main Circuit :
Monitor Circuit :
Monitor Circuit :
Contact Configuration *10
Approx.
7 0
Approx.4 2 (Lock)
(Travel : mm)
Type
0 (Actuator Mounting Reference Position)
52
51
51
52
(+)
X2
(-)
X1
Indicator
*9
• Contact operation is based on the condition that the actuator is inserted onto the
center of the safety switch slot.
• Contact opera ion shows he HS9Z-A1S, A2S, A3S actuator.
• Use main circuit or monitor circuit with for the input to safety circuit.
CAUTION
*9 This locking monitoring marking has been newly described in section 9.2.1 of
EN ISO
/ ISO14119.
It indicates that any devices with this marking meet the
following EN ISO
/ ISO 14119 requirements:
- General (- General requirements for guard locking devices) (Section 5.7.1) *
- Locking monitoring (- Locking monitoring for guard locking devices) (Section
5.7.2.2)
When a lock monitor circuit (contact) has the locking monitoring marking, it
means that one circuit (contact) can monitor the position and the locking
function of the protective door.
(The locking monitoring circuit (contact) turns
ON only when the protec ive door is closed and locked.)
*note
Both types of HS1L safety switches - spring lock type switches and solenoid
lock type switches - have obtained the locking monitoring certification marking.
Based on risk assessment results, solenoid lock type switches can be used
only for limited applications which do not especially need to be locked for
safety.
*10 The Actuator is inserted, and HS1L is locked.
Door States
Manual Unlock Key
Main Circuit
11-42
21-52
Monitor Circuit 31-32
Monitor Circuit 33-34
Monitor Circuit 61-62
Monitor Circuit 63-64
Spring Lock Type (HS1L-
□
4)
Solenoid Power A1-A2
Solenoid Lock Type (HS1L-
□
7Y)
Solenoid Power A1-A2
Closed
-
Closed
Closed
Open
Closed
Open
Off
On
Closed
-
Open
Closed
Open
Open
Closed
On
Off
Open
-
Open
Open
Closed
Open
Closed
Off / On
Off / On
*12
Closed
Turn the key
to unlock position
Open
Closed
Open
Open
Closed
Off
Off
*11 *12
Operation Cycle
•
Door is locked.
•
The machine can
be operated.
•Door is unlocked.
•The machine can
not be operated.
•The machine can
not be operated.
•Door is unlocked.
•The machine can
not be operated.
CAUTION
*11 Do not attempt manual unlocking when the solenoid is energized.
*12 Do not energize the solenoid for a long time while the door is open or when the
door is unlocked manually.
6
Wiring
* Do not remove the wires of the
terminals 12-41 and 22-51, because
these terminals are interconnected in
factory for safety circuit inputs. Use
terminals 11-42 or 21-52 for safety
circuit inputs.
I
50±2
60±2
II
Wire Length : L (mm)
Through Conduit Port
Wire Length inside the Safety Switch
I
II
C
D
E view
B
A
Cable side applicable connector
L
Safety Switch
Conduit hole
connector
When wiring, the terminal number on each contact is
identified by connector number.
The following shows the identification of terminal
number.
Terminal Number Identification
X2
X1
A2
A1
B2
B1
A2
A1
62
/
64
32
/
34
52
42
11
61
/
63
31
/
33
21
B3
B2
B1
A4
A3
A2
A1
B4
A The connector built in
the safety switch E view
B The connector built in
the safety switch E view
A The connector built in the safety switch
Tab housing : 1-1903130-4 (8pin) (made by Tyco Electronics AMP K.K.)
B The connector built in the safety switch
Tab housing : 1-1903130-2 (4pin) (made by Tyco Electronics AMP K.K.)
C Cable side applicable connector (option)
D-1200D series (made by Tyco Electronics AMP K.K.)
Receptacle housing : 1-1827864-4 (8pin)
D Cable side applicable connector (option)
D-1200D series (made by Tyco Electronics AMP K.K.)
Receptacle housing : 1-1827864-2 (4pin)
Receptacle contact :1827586-2 (Applicable cable size : AWG30 to 28, loose piece)
1827587-2 / 1827588-2 (Applicable cable size : AWG28 to
22, loose piece)
1827589-2 (Applicable cable size : AWG22 to 18, loose piece)
* To prepare correct Cable side appricable connector for the connector type, read the
instruction sheet and catalog of Tyco Electronics AMP K.K. and understand the
installation and wiring method.
: 0.05 to 0.86mm
2
(AWG30 to 18)
* Confirm application of Receptacle Contact to use.
* When using a stranded wire, make sure that adjoining terminals are not
short-circuited with protruding core wires. Also, do not solder the core wires to avoid
protruding wires.
Applicable Wire Size in Cable Side Applicable Connector
Internal Connectors
Conduit Hole Connectors
Use a connector with a degree of protection IP67.
Applicable connector dimensions: See the figure on
the right.
9mm max.
Conduit Thread
30mm max.
• When using flexible conduit and metal connector
Applicable Flexible Conduit Example:
Type VF-03 (made by Nihon Flex)
Applicable Metal Connector Example:
(G1/2) Type RLC-103 (made by Nihon Flex)
(PG13.5) Type RBC-103PG13.5 (made by Nihon Flex)
(M20) Type RLC-103EC20 (made by Nihon Flex)
• When using plastic connector, metal connector and multi-core cable
(G1/2) Applicable Plastic Connector Example :
Type SCS-10
□
(made by Seiwa Electric)
Applicable Metal Connector Example :
Type ALS-16
□□
(made by Nihon Frex)
(PG13.5) Applicable Plastic Connector Example :
Type ST13.5 (made by LAPP)
Applicable Metal Connector Example :
Type ABS-
□□
PG13.5 (made by Nihon Flex)
(M20)
Applicable Plastic Connector Example :
Type ST-M20×1.5 (made by LAPP)
Applicable Metal Connector Example :
Type ALS-
□□
EC20 (made by Nihon Flex)
Note : Confirm the outside diameter of the multi-core cable, the connector type
depends on the outside diameter of multi-core cable.
Note : When using ST-M20×1.5, use with gasket GP-M (Type No: GPM20, made by
LAPP).
(Actuator
Pulled Out)
(Actuator
Completely Inserted)
Contact Closed
Contact Open