22
DD48
Series
Display Units
30
48
44.4
5
74
(For left side) (For right side)
7
7
5
64
44.4
53
48
6
60
60
48
8
Accessories (Optional)
Spacer
DD48-FY1-B
(black)
End Plate
DD48-W-
(B: black, Z: beige)
Mounting Clip
DD48-KT1
(black)
Characters can be engraved on
the filter. Used for adjusting the
number of units.
Mounting Method: Same as
display units. Refer to Unit
Combination on page 25.
End plates must be installed at
both ends of the assembly of
the display units.
Mounting Method: Refer to Unit
Combination on page 25.
Used to fasten the display units
to the panel when mounting four
units or more.
Mounting Method: Refer to
Panel Mounting on page 25.
Weight (approx.) 22g
For left
side
For right
side
Weight (approx.)
20g (pair)
Weight (approx.) 7g
End Plate
30
30
30
7
7
30N + 14
(DD48-FY1-B)
(DD48-W- )
48
34
Binary
Display Unit
Decimal
Display Unit Spacer Unit
Panel Thickness: 0.8 to 4
5
74
44.4
16 min.
N : No. of digits (N ≤ 16)
30N
+ 9
+1
-0
45
45min.
+0.
6
-0
9.5
Dimensions & Panel Cut-out
Display units can be combined for up to 16 digits.
When combining 9 to 16 digits, it is recommended to use the long
filter.
(Panel Cut-out)
Note: The panel cut-out width shown above is the minimum length
required. When mounting many display units, determine the
panel cut-out width to fit the actual size.
All dimensions in mm.
Note: When mounting more
than 16 units
