19
DD48
Series
Display Units
Modular units can be combined for up to 16 digits.
•
Super bright LED
•
Units can be combined together and installed into a panel
cut-out by snap fit.
•
Binary and decimal display units are available.
•
Easy wiring and maintenance
•
LED display color: red or green
•
Decimal display units are available with zero suppression
function.
•
Available in positive and negative input logic types.
DD48
Unit
Input
Logic
Housing
Color
Part No.
Binary
Display
Positive
Black
DD48-F01PB
*
DC24
Beige
DD48-F01PZ
*
DC24
Negative
Black
DD48-F01NB
*
DC24
Beige
DD48-F01NZ
*
DC24
Decimal
Display
Positive
Black
DD48-F31PB
*
DC24
Beige
DD48-F31PZ
*
DC24
Negative
Black
DD48-F31NB
*
DC24
Beige
DD48-F31NZ
*
DC24
Note: Specify the LED color code in place of
*
in the Part No.
MR: red, R: red (super bright), G: green
Accessories (Optional)
Name
Part No.
Spacer Unit
Black
DD48-FY1-B
End Plate (Pair)
Black
DD48-W-B
Beige
DD48-W-Z
Mounting Clip
(Note 1)
Black
DD48-KT1
Long Filter
For red LED
DD48-P16R
For green LED
DD48-P16G
Connector
Solder Terminal
DMC-4
PC Board Terminal
DMC-5
Mother Board
for 4 digits (with
connectors)
Binary/Decimal/
Character Display
DD48-MB1-4
Connector for
Mother Board
Type A
DD48-JE1A
(Note 2)
Type B
DD48-JE1B
(Note 2)
Type C
DD48-JE1C
(Note 2)
Note 1: Used for mounting four units or more.
Note 2: Specify a cable length code in place of
in the Part No.,
referring to the table below.
Cable Length Code for Mother Board
Code
0.5
1
2
3
4
5
Cable Length (mm)
500
1000 2000 3000 4000 5000
Note: Input connector types
DD48-JE1A
: Flat cable connector for direct mounting on
PC boards
DD48-JE1B
: Flat cable connector conforming to MIL
Standard
DD48-JE1C
: None (soldering, etc)
Specifications
Power Voltage
24V DC ±10%
Power Consumption
(Approx.)
Binary: 0.9W
Decimal: 2.0W
Operating Temperature
–10 to +55°C (no freezing)
Storage Temperature
–25 to +80°C (no freezing)
Operating Humidity
35 to 85% RH (no condensation)
Data Input
L: 0 to 2V
H: 12 to 30V
Display Character
•
Binary display unit
red or green LED display: –
•
Decimal display unit
7-segment red or green LED:
0 to 9, decimal point
Character Height
(Approx.)
•
Binary display unit: 2.5 mm
•
Decimal display unit: 25.4 mm
Input
•
Binary display unit:
–, Latch, and Blank inputs
•
Decimal display unit:
Binary-coded, Latch, DP, and RBI
inputs
Output
•
Decimal display unit: RBO output
Input Logic
Positive or negative
No. of Digits
16 digits max.
Unit Combination
Snap fit
Panel Mounting
Snap fit
Degree of Protection
IP40 (IEC 60529)
Weight (Approx.)
Display unit: 50g
End plates: 20g (pair)
Note: It is recommended to use a long filter when combining 9 to
16 digits.
