Technical Specification:
• Maximum Capacity: 550 LBS (250 kg)
• Minimum Capacity: 22 LBS (10 kg)
• Weight Mode: kg (kilograms), st (stones), and lb (pounds).
Assembly without Pole:
1. Place scale on a flat surface. Gently pull the monitor (A) upward
to detach.
2. Open battery compartment on the flip side of monitor (A)
and insert 2 AAA batteries matching the correct polarities as
indicated inside. Replace battery cover.
3. Connect the short micro USB cable (F) into USB port located
on the underside of monitor (A).
4. Pass other end of short micro USB cable (F) through the
display base (I) and gently replace monitor (A) back into place.
Connect USB cable (F) into port (I). Place cable inside track and
use adhesive tape (J) to keep in place.
5. Press On button (A) to turn On. Press again to choose weight in
kilograms (kg), stones (st), or pounds (lb). Note: if no selection
has been made, the display will automatically turn off after 12
seconds and will turn On when you stand on the scale.
6. Stand still on the scale until numbers stabilize and flash twice.
Note: if the scale does not automatically turn On, simply press
the On button.
