#61-844SW
3. Interpolation. To change the interpolation, click on the arrow button. Lower values
of interpolation give a more pixelated display. The following settings are available.
x1 (47 x 47) (see below).
x2 (94 x 94).
x4 (188 x 188).and
x8 (378 x 378) (see below)
x1
(47
x
47)
x8
(378
x
378)
4. Zoom factor. To change the zoom setting, click on the arrow button. The following
four settings are available x1, x2, x3, x4
(examples of x1 and x3 shown below).
x1 Zoom
x3 Zoom
5. Image alignment. This allows the vertical and horizontal alignment of the thermal
and visible images. Clicking on the navigation arrows will move the visible image
while the infrared image remains stationary. It is easiest to adjust with a 50%
thermal and 50% visible image.
Note: Clicking on the reset button returns the alignment to the setting when the file
was opened.
ND-7035-1
Page 10 of 23
