Rev. 10/05/2012
View Triggered Events
If alarm has been triggered it will flash on the LED screen. To view, in standby mode,
press
#/DOWN
button to view the
last 5 triggered Events. Once viewed, TRIGGER
will disappear from the screen.
View stored telephone numbers
In standby mode, press
*/UP
to view stored telephone numbers.
NOTE
: If no buttons are pressed for 10 seconds, the auto-dialer
will automatically exit
view mode.
TO LEARN ADDITIONAL WIRELESS SENSORS OR REMOTE CONTROL
CODES.
The water detector included in this package has already been learned to the auto
dialer in zone 1
. You may learn additional sensors to your auto-dialer or you can move
the water detector to another zone, and at some time you may have to re-learn existing
parts.
The system has a total of 10 on screen zones for wireless sensors and remote controls.
Zone 1-7:
Learn up to 7 wireless sensors, and they will trigger the dialer in armed mode
only.
Zone 8S:
Learn up to 8 wireless sensors and they will trigger the dialer in armed mode
only.
Zone 24H
(24H standby mode): Learn 8 wireless sensors and they will trigger the auto
dialer in armed or disarmed mode.
Zone REMOTE
(LCD icon REMOTE) is the remote control zone and you can learn up
to 8 remote controls. (Ideal Security part # SK629 ONLY)
You can learn a total of 23 sensors and 8 remote controls to this unit.
Each new sensor or remote must be learned to the auto dialer. Follow the following steps.
a.
Enter your password and press the
PROG
button three (3) times.
b.
The “LEARN” icon will flash on the screen. (FIG.7)
c.
Press
ARM/DISARM
to confirm, the system will go into learning ID
code mode and zone 1 icon will flash
d.
Press the
*/UP
and
#/DOWN
buttons to select the zone you wish to
learn your sensor to. When the screen flashes NO ID CODE, that means that
zone is empty and you can learn a sensor. If the screen flashes FULL then you
already have a senor learned to that zone. You can either choose another zone
or press
DEL./PAUSE
to delete the sensor in that zone and learn the new
sensor.
