31
- Keyboard Control Code Screen
- The control
commands from the
keyboard of an external
control are displayed on
the screen. Most
important is that the
communications speed
be matched.
When you want to know the input signal of an exterior
controller, you can see the input data by connecting the
communications cable to the RX terminal of the
SecuriTEST.
Using the PTZ Controls
PT control (Up, Down, Left, Right), is performed using
the arrow keys. Zoom is controlled using the
TELE/WIDE buttons, and focus is controlled with the
FAR/NEAR buttons.
PTZ Function Setup
Press the
key then use the arrow keys to
select GPST / SPST / TOUR / and SPD functions. Press
to activate a function
GPST: Short for GO TO PRESET - Moves the
camera view to the designated preset location.
SecuriTEST can address up to 99 stored
positions in the camera. The camera goes to
the GPST position after the
key is
pressed. Select the previously memorized
PRESET number using the arrow keys. When
the desired number is displayed, press
Summary of Contents for SecuriTEST
Page 1: ......
Page 10: ...9 Names Functions ...
Page 38: ...37 Crossover Cable Short circuit Disconnection Direct Cable ...
