10
OPERATING INSTRUCTION
CORDLESS KETTLE WITH TEMPERATURE
CONTROL PANEL
IK1103
TECHNICAL DATA
- power:
1850-2200W
- mains voltage:
220-240V~ 50/60Hz
-
1.7
litre capacity
INTENDED USE
The IK1103 wireless kettle is intended for boiling water. It is fitted with the function of temperature control
and hold (85 – 100°C). The capacity of the kettle allows to boil 0.5–1.7 l of water.
The maximum and minimum level of water is marked with the indicator (6).
OPERATION
All changes of settings are confirmed with audible signal.
- Place the base of the appliance (7) on flat, stable and dry surface.
- Excess cord may be kept inside the base. Make sure that the cord protrudes from the base (7) through
the special groove to have the appliance stable.
Boil water 2-3 times and discard before the first use of the kettle.
- Fill in the appliance after opening the cover (2).
Do not fill in the kettle while on the base
- The kettle will be activated after pressing the button (A).
- Operation of the appliance is signaled with illumination of the jug (8).
- The kettle will be automatically turned off when the water is boiled.
- The appliance may be turned off at any time with the button (A).
TEMPERATURE CONTROL
The kettle allows to warm up water to the pre-set temperature.
- To select the required temperature of water (40°C, 70°C, 80°C or 90°C), press the button (B) to cause
illumination of the relevant indicator on the panel (4).
- Operation of the appliance is signaled with illumination of the jug (8). Illumination color depends on
the selected temperature.
- When the preset temperature is reached, the kettle will turn off.
Note. Taking the kettle off the base cancels the settings.
- The appliance may be turned off at any time with the button (A).
GENERAL DESCRIPTION
1. Spout
2. Opening lid
3. Lid release handle
4. Control panel
5. Handle
6. Water level indicator
7. Base
8. Glass body with LED light
EN
1
8
2
3
4
5
6
7
A
B
