2
Concord CXAP 40-100 -
User's Guide
ALL MODELS
THE GAS SAFETY (INSTALLATION AND
USE) REGULATIONS 1994 AMMENDMENT
OR RULES IN FORCE
impose certain statutory
obligations on gas users.This appliance must be
installed by a Corgi registered installer.
WARNING.
This appliance
MUST
be efficiently earthed
1.
It is ESSENTIAL that the instructions in this booklet are
strictly followed, for safe, economical operation of the
boiler.
2.
Do not obstruct ventilation ducts, grilles or openings in the
boiler room, or the passage of combustion and ventilation
air to the boiler.
3.
Do not store objects around or on the boiler, and keep
access clear at all times.
4.
Switch off and disconnect the electricity supply before
carrying out maintenance work.
5.
Do not turn off the boiler if it is to be left unattended in
frosty weather.
MAINTENANCE
The appliance should be serviced at least once a year by a
CORGI registered installer.
CLEANING
For normal cleaning simply dust with a dry cloth.
To remove stubborn marks and stains use a damp cloth and
mild detergent.
DO NOT use abrasive cleaning materials.
CHANGING CYLINDERS
a.
Ensure that the replacement cylinder is the correct one for
the installation.
CHANGING CYLINDERSHH
CAUTION.
To avoid the possibility of injury during the use or cleaning of this
appliance care should be taken when handling edges of sheet steel components.
CONCORD CXAP 40 - 80 models
1
6
5
4
2
2
3
b.
Extinguish any fire, flame our source of ignition (including
cigarettes, pipes and pilot lights) before changing the gas
cylinder.
c.
Change cylinders with caution.
d.
Ensure that the gas cylinder valve(s) is/are closed before
disconnecting an empty cylinder or before removing any
plastic cap or plug on the outlet connection of the
replacement cylinder.
Never use tools on cylinder valves, hand wheels or levers.
Note.
Cylinders with threaded connections have a left-
hand thread. For cylinders with self-sealing clip-on valves,
ensure that the regulator cap is closed before
disconnection.
e.
Ensure that the replacement cylinder connections are
gastight. Any leaking vapour will have a distinctive odour.
Test by brushing soapy water around the connections -
bubbles will form if vapour is leaking.
NEVER USE A NAKED FLAME
f.
It is essential that the correct pressure regulator, with the
correct pressure setting and capacity for the installation,
be used in accordance with the manufacturers
instructions.
g.
In the case of a pressure regulator or a gas appliance
which relies upon a sealing washer to maintain a gastight
joint, it is essential to check that the washer is present
and that it is sound and correctly positioned prior to
making the connection.
h.
Where connections are designed to be tightened with a
spanner, it is essential that a spanner of the correct size is
used and that the union is firm - hand tightness is not
sufficient.
When self sealing valves are incorporated in a gas cylinder,
connections should be made in accordance with the
manufacturer's instructions and tools should not be used.
LEGEND
1.
Thermostat knob.
2.
Mains gas inlet cock.
3.
Overheat thermostat
button.
4.
Lockout light.
5.
Lockout reset button.
6.
Burner on light.
7.
Overheat light
7
