IDEAL A-2200IEH-XR, Installation, Operation & Maintenance Manual

Page: 13 / 23

13
Oct. 2018
A-2200IEH-XR
5. Maintenance Instructions
Contact your service provider for instructions before starting up if you are not completely familiar with lift
’s maintenance
procedures. Only qualified personnel can perform maintenance on this equipment. Any failure in operation may cause
personal injury and/or damage to lift.
Daily:
ü
Wear necessary protective equipment before use, includes, but not limited, gloves and protection glasses,
working suits and shoes.
ü
Always keep bolts tight. Check periodically.
ü
Always keep lift components clean.
ü
If oil leakage is observed, contact your service provider.
ü
Check safety latches for free movement and full engagement with lift are properly working
ü
Check hoses connections for leakage.
Every Month:
ü
Lubricate locking latch shafts. Push latch handle several times for oil to penetrate joints.
ü
Lubricate the sliding pieces with heavy duty bearing grease.
ü
With lift lowered check the hydraulic fluid level. If necessary add oil as described in the Installation Instruction
section of this manual
ü
Check platform latch synching: Latches should click at the same time.
ü
Check tightness of all bolts.
ü
Check the nuts for tightness every week for the first month, and every month afterwards.
Every 6 Months:
ü
Check and clean the oil filter, if applies.
ü
Check the hydraulic oil for proper level with lift in down position. Refill reservoir tank with hydraulic oil if
necessary with AW 32 or AW46 Non-Detergent Non-Foaming Anti-Wear Hydraulic Oil.
ü
If Lift stops short of full rise or chatters, contact your service provider.
ü
Replace all caution, warning or safety related decals on the lift if unable to read or missing. Reorder labels
from service provider.
ü
Check all components for wear.