IDEAL 61-847, Manual

Page: 21 / 80

20 21
Button Response Default Function Operation
MAX MIN AVG DIFF Last Selection Short press toggles sequentially through the 4 selections
HI, LO Alarms, Emissivity,
Degrees F or C, Audible,
Auto Power Off delay.
Lock Measurement
Setting
HI Alarm Setting
When HI or LO appear, press the up or down arrow keys to increase or decrease the alarm
levels. When the emissivity icon appears, press the up or down arrows to increase or decrease
that value. NOTE: 0.95 is a good general purpose setting for most materials. When F or C
appear, press either arrow key to switch to the other scale. When the speaker icon appears, press
either arrow to select sound to be on or off. A beep will sound when you select sound to be on.
When the lock icon appears, using the arrow buttons select the minutes and seconds before the
unit auto powers off. Use the ‘Backlight/Laser’ button to toggle between minutes and seconds.
HI LO Last Selection Press to select HI or LO alarm indication. OK appears if temp is within alarm limits.
Backlight or Laser On
or Off
Last Selection Short press toggles the Backlight On or Off. Long press toggles the laser pointers On or Off.
Increases or decreases
variable values.
None Short Press for small increments or hold for long increments of selected value.
Lock Measurement Indicator
Buzz Indicator
Temperature Measurement
Alarm Indicator
Low Battery Indicator
Temperature Measurement
Indicator
Temperature Hold Indicator
Temperature Unit Indicator
Main Display of the Measured
Temperature
Auxillary Display of the
Measured Temperature
Emissivity Indication
Laser Indicator
Measurement Mode Indication
MAX MIN
AVG DIF
C F
HOLD SCAN
OK LO HI
=
3