NaviTEK NT
151844 Iss 4
User Guide
Page 28
Cable Tests
Wiremap
Setup
Cable Type
–
2 Pair
- 4 Pair 568A
- 4 Pair 568B
Shield
-
UTP
- STP
- UTP/STP
NVP
– Fixed 72%
- Custom 59% - 89%
Termination Type
None
- Open
Active Remote -
#1 - #12
Tests (No Termination)
Faults
– Open circuit by pair
- Short circuit by pin
Length of pair
– Metres / Feet (Set in System Setup)
- Range 3-100m / 10-330ft
Tests (Active Remote Termination)
I/D
– Remote #
Indications
on Remote
– Voltage Warning (>±10volts on any pins)
- Pass/Fail
Faults
– Open circuit by pin
- Short circuit by pin
- Crossed pairs
- Split pairs
- Bridged shorts
- Remote shorts
Length of pair
– Metres / Feet (Set in System Setup)
- Range 3-100m / 10-330ft
Tone Generator
Setup
No of
Tones – 3
Wire I/D – Tone applied to one of 8 pins relative to the other 7
- Tone applied across one of 4 pairs
Test
Audible tone detected using compatible tone probe