NaviTEK NT
151844 Iss 4
User Guide
Page 15
Power over Ethernet
When an Ethernet link is established, Autotest automatically tests the port for the presence of
PoE and measures the available power by applying a minimum load. Select the PoE field in the
HOME screen and press ENTER to display the PoE screen.
Test result
Test type
Select PoE or PoE+ in the test
setup screen
Pair
PoE may be presented on
pairs 12-36, 45-78 or both
Test Data
Shows the voltage, current
under load and power
supplied by the port
Test Status
RUN
Press F1 (RUN) to re-run
the PoE test without
saving a result
SETUP
Press F3 (SETUP) to
access the PoE test setup
screen
MORE
Press F1 (MORE) to display
the next screen
802.1x
Shows the status of the
802.1x connection