LanTEK III
161809 Iss 2
User Manual
Page28
Autotest Pref
Description
Enable 606A
Enable labelling standard TIA/EIA 606-A for telecommunication
infrastructure as cable ID.
NOTE:
If labelling standard TIA/EIA 606-A
is enabled; the selected cable
name (simple cable ID/default cable ID) is not applied.
Enable Wiremap On
Failed Autotest.
In case of failed Autotest, it determines whether another fault
analysis will automatically be performed.
5.2
Select Job Folder
The name of the current job folder is shown in the TFT display on the ready screen. To save
the Autotest it is possible to keep this job folder, enable another existing job folder, or
create a new job folder.
5.2.1
Enable Existing Job Folder
1.
Use
Arrow keys
to navigate to "File" and press
Enter
to open the job list.
Fig. 22 File
2.
Use
Arrow Keys
to navigate to the desired job folder. The display is highlighted blue.
Summary of Contents for LanTEK III
Page 1: ...LanTEK III ...
Page 78: ......