Ideal Heating IMAX XTRA 2, Manual

Page: 9 / 12

9 Conversion Kit
PROPANE DATA LABEL AND OVERLAY
1. Ensure that the boiler has had the orifice plate removed and
the parameters have been updated for Natural Gas.
2. The boiler front panel will need to have been removed to
expose the location where the labels are to be affixed.
3. Record the original boiler serial number (located on the
overlay Label) onto the Natural Gas data label and the two
tear off strips.
4. Once all details have been recorded, adhere one of the two
tear off strips over the existing label at the rear of the boiler
and the other one over the existing label on the cover of the
installation manual.
5. Adhere the Natural Gas label over the existing overlay data
label located at the front of the boiler as shown below.
Natural Gas data plate
label to be affixed here on
top of the Overlay label
Propane data plate
label to be removed
from the boiler
Existing Master
Barcode label
Typical view looking at the front of all boilers (front panel removed)