40 / 70
00U07352240-A_ EN
AHP60 14/18 kW -
Installation, Use and Maintenance
3.6.4.
Connecting the command unit
See Ecomod Heat Pump Control instructions.
3.6.5.
User terminal
The terminal block is under the machine cover. To access it, refer to the instructions in paragraph
2.5.2. The terminal block must be connected in compliance with the remarks below.
Figure 12 - Terminal block APHP60 14-18 kW
CAUTION:
It is important to separate high voltage cables from very low voltage cables
L1 - L2 - L3 - N - PE => General power supply
Ecomod Heat Pump Control Communication bus
Programmable alarm report
External safety element
Programmable defrosting signal
F1: 3 x fuse 16A, aM 10.3 x 38
K2: phase controller
Programmable input (e.g. silent mode)
Cable glands
