background image

49

BRAKES

24  Warnings for using the brakes

The following warnings always apply to the use of brakes, regardless of the type or types of 

brakes fitted to the pedelec.

 

WARNING

Risk of accident and injury!

When you ride on icy, wet, slippery or dirty roads, the tyres have less grip. This 

lack of grip reduces the braking power, increases the braking distance and the 

pedelec can swing out if you brake suddenly.

 

»

Always adapt your cycling style and speed to the current weather conditions 

and road characteristics.

 

WARNING

Risk of accident and injury!

If you brake the front wheel abruptly, you could be thrown over the handlebar 

or fall off the pedelec.

 

»

Use the front brake very cautiously when riding at high speed.

 

»

Always brake simultaneously with the front and rear brakes. Make sure that you 

do not brake your pedelec abruptly with only the front brake, especially when 

riding at high speed.

 

»

Adjust the intensity with which you brake your pedelec – i.e. the braking power 

– according to the cycling situation.

 

WARNING

Risk of accident and injury!

If you brake the rear wheel abruptly during certain cycling manoeuvres, the 

wheel may block, causing you to fall.

 

»

Be very careful when using the rear brake around corners.

Summary of Contents for PRISMA-810





































































































Reviews: