Subject to technical changes | Valid from January 2021
38
OPERATION – CARE
CALEO HOT/NEUTRAL
03
Display
Heat setting
Supporting heat
2
deactivated
Primary heat
3
deactivated
(neutral mode)
Supporting heat
2
level 1
Primary heat
3
level 1
Supporting heat
2
level 2
Primary heat
3
level 2
Supporting heat
2
level 3
Primary heat
3
level 3
When the unit has been connected to the power supply, “OFF” appears
on the controller display. To switch on and off, press button
6
.
By pressing the buttons, the supporting heat
1
and primary heat
3
can be activated
separately from each other with three levels each. The heating levels are shown visually
on the controller display
After the unit has been switched on, the controller display
1
always shows power level
NEUTRAL for all heat sources. The unit does not heat up. The light can be switched
on and off
1
.
The listed levels for supporting and primary heat can be set individually as required. The pre-set programs can be selected
by pressing button
5
. The currently active program is shown by the respective red LED in area
8
.
NOTE
Operation
Heat settings
