A S S E M B L I N G G U I D E L I N E
M A _ C A L E O S Y S T E M _ E N _ 2 1 A
Rev
. 21A
AKE GmbH
page 8 of 12
3.1.2 bottom well cover plate
Carefully press the cover plate into the edges of bottom well of each unit.
Assembly specification
Installed on unit
3.1.3 air flow adapter
The air flow adapter is necessary for best cooling air flow when cooling units are set up
WITHOUT
side
wall glasses and air duct cover panels
.
Install the air flow adapter between cooling units.
Assembly specification
Installed on unit:
NOTE:
fix it with torx screws (6x torx M3x10mm). the air duct cover panel must be dismantled!!
3.1.3.1
air duct cover panel
All cooling units are produced and delivered in standard version with installed air duct cover panels.
When installing a cooling unit next to each other the cover panels must be removed on the gap where
the air flow adapter is installed.
Deinstall the air duct cover panels between two cooling units.
standard specification
System specification
