A S S E M B L I N G G U I D E L I N E
M A _ C A L E O S Y S T E M _ E N _ 2 1 A
Rev
. 21A
AKE GmbH
page 5 of 12
Step 3:
Slide in the back connector into the back panel connection plates.
NOTE:
Install the different back connector parts. Take notice to different configuration of each part.
Back connector with elongated hole
Back connector with thread hole
Step 4:
Connect both back plates, overlap the holes, fix and tighten them with hexagon socket screws
(M6) or with special bolts (as shown in the picture see chapter 3.1.6-> using with air waste panel).
NOTE:
Check the tight fit of the mounting plates.
Step 5:
Attach the side cover panel on the outermost left and right exposure of the system.
Assembling instructions / steps see
chapter: 3.1.5
Step 6:
Attach the waste air panel on the top of side cover panels.
Assembling instructions / steps see
chapter: 3.1.6
NOTE:
guarantee the air waste panel is not covered or dirty. The air circulation must be ensured for
the correct function of the build-up devices / the complete Caleo system.
