21
珠 海 贝 尔 科 技 有 限 公 司
Zhuhai Bell Technology Co., Ltd
③
Check whether the filament can pass through the teflon tube smoothly;
④
Check whether the nozzle reaches the temperature required for the material to melt;
⑤
Check whether the gear on the extruder motor is loose.
4.Display abnormality
①
Try to restart the printer;
②
Ensure correct wiring and good contact.
5
、
Motor lose step
①
If the printing speed is too fast, you can try to adjust the printing speed, acceleration and other
parameters;
②
Belt tightness is too loose, adjust the tightness to moderate;
③
Make sure the printer prints without external interference when printer is printing;
④
Check whether the synchronous wheel on the XYZ motor is loose, and adjust the Z-axis
synchronous belt and conveyor belt to a suitable degree of tightness.
6
、
The model does not adhere well to the hot bed
①
Adjust the distance between the nozzle and the hot bed so that the distance between them is
about a piece of paper thickness;
②
Set the proper temperature of the bed;
③
The printing speed on the first floor is too fast.
7
、
Abnormal temperature display at main interface
①
Detect if the thermistor is damaged and replace it;
②
Check whether the connection of print head and main board is loose.
8
、
The printer vibrates too much
①
Check whether the four corner footpads of the printer have come off;
②
Slow down printing ;
③
Set print speed, acceleration and other related parameters.
9
、
Nozzle leakage material
①
Check connections between nozzles, heating blocks and pipes and tighten with a wrench;
②
Replace print head.
10
、
Model mismatch
①
An error occurred while slicing the model;
②
Ensure that no external force interferes with the printing process;
③
Refer to motor drop step method to solve.
