20
珠 海 贝 尔 科 技 有 限 公 司
Zhuhai Bell Technology Co., Ltd
②
检查喷头、主板的接线是否松动
8
、传送带异响
①
检查传送带是否调的太紧
②
传送带压片是否压得太紧
③
检测是否有外力影响传送带运动
9
、喷头漏料
①
检查喷嘴、加热块、喉管的连接,用扳手拧紧
②
更换打印头
10
、模型错位
①
对模型进行切片时发生错误
②
确保在打印过程中无外力干扰打印机打印
③
参照电机丢步方法解决
Ⅴ
.Frequently Asked Questions
1.Unable to read SD card data
①
Try to restart the printer;
②
Make sure the file extension is .gcode;
③
The file name is composed of English
、
Numbers etc., if use other languages may not be
displayed;
④
The SD card is damaged, try to replace it with a new SD card.
2.nozzle blockage
①
Try to replace the spare nozzle;
②
According different filament to preheat to the specified temperature, and by manually; pressing
filament, so that filament extrusion smoothly from nozzle;
③
Remove the print head and clean up the nozzle and throat;
④
If the nozzle is damaged, replace it.
3.The extruder slips
①
Adjust the mechanical adjusting nut of extruder to make the friction force of extruder feed filament
moderate;
②
Check whether the supply of filament is stable and prevent filament from winding;