UM_T
EO
d8_v1_D
EF
7
1.2.Rear Panel
1.2.1.Power Connector
The TEOd8 has an internal power supply that will accept voltages ranging from 110V - 240V at frequencies from
50Hz-60Hz. An IEC cord is included.
1.2.2.Power Switch
The Power Switch turns the TEOd8 on and off.
Note: we recommend that power amplifiers connected to the product should be powered down prior to turning
on the TEOd8.
1.2.3.Analog inputs
The analog input section of the TEOd8 offers 4 electronically balanced XLR connectors. The maximum input level
is +23dBu max, electronically balanced.
1.2.4.Ethernet Connector
The RJ-45 connector is used to connect your product to a network. It can then be configured and controlled in
real time with the PC and MAC configuration program. With this program you can also update your DSP to the
latest firmware. Please check our website regularly for updates.
1.2.5.AES/EBU Input
The digital input of the TEOd8 offers an input channel on an electronically balanced XLR connector. The
processor will accept AES/EBU and S/PDIF input signals of 16 to 24 bit 44.1, 48, 88.2, or 96kHz.
1.2.6.Analog Outputs
The output section of the TEOd8 offers 8 electronically balanced XLR connectors. The maximum output level is
+12dBu, impedance matched.
