DESCRIPTION
The LinkMaster™ Pro powers on and begins testing automatically when a remote is attached to the far
end cable jack. If no remote is used, it can be powered on by pressing any of the four buttons. It
automatically powers off after a few seconds when the remote is disconnected. LinkMaster™ Pro
powers off automatically after 5 minutes of continuous testing of a single cable. Disconnecting the
cable restores the tester to normal function. Most power-on modes will timeout in 20 minutes. The
tone mode will power off after 2-1/2 hours. The LinkMaster™ Pro will turn on in the last mode used
before turning off.
2
LinkMaster Pro™ Reference Card
Tester Off
Connect to remote - Auto-on and test cable
Press any button - Turns on in mode last used
Tester On
Operating modes are:
Pretest
- Pretest cable from one end for shorts, opens or
splits. With Remote, performs complete cable tester with ID.
Exit to mode select
Start a new test (in pretest only)
Length
- Measure length of cable
Exit to mode select
Select specific pair or Auto-select pairs
Adjust capacitance/ft or m (CAL)
Tone
- Apply tone to pin, pair or all pairs
Exit to mode select
Select from 4 tone sounds
Select pin or pairs w/tone signal
Setup
- Set user selectable options
Exit to mode select
Toggle option to other choice
Scroll through options
Options:
Beep-on-Pass On or Off
Pass Shielded or Unshielded Cable
Length in Feet or Meters
Coax
-Identify remote color and number. Tests for opens or
shorts.
Exit to mode select
Start new test
Mode Select
- Used to step through above functions and to
turn off the tester.
Advance to next mode
Enter currently displayed function
MODE
SEL
MODE
SEL
▼
▼
MODE
SEL
▼
▼
MODE
SEL
MODE
SEL
MODE
SEL
▼
▼
LinkMaster™ PRO LCD Display
