②
The Infrared and the probe are all enabled in this
state, but the function of auto power off will be
disabled. (the measurement method of the Infrared
refer to 5-1)
③
Insert the probe at least 12mm(1/2”) into the
target, then the meter will measure the core
temperature automatically.
The probe comes to equilibrium with the object
being measured until the LCD reading is almost
steady.
When the highest accuracy is required, it is
advisable to keep on measuring for a moment after
the reading is almost steady to insure the probe
has fully stabilized and reached equilibrium with the
object.
NOTE:
The probe tip must be sterilized before and
between
measurements of food samples to avoid cross
contamination.
5-3.Other function
Press the “
℃
/
℉
” key during measurement can
select or switch the temperature unit
℃
and
℉
(
℃
/
℉
switches in a
cycle ).
Warning: Do not point laser directly at eye
or indirectly off reflective surfaces.
6 D:S ratio
