13
8.
Working state checking
1.
After propellers are correctly installed, power on flight and
check joystick movement
2.
level flight on the ground, and put transmitter besides it
3.
power on the flight, hold the flight by the left hand《
Do
not touch propellers
》pull throttle stick up to 20%.
4.
roll aileron, elevate, rudder joystick to check whether
flight performs correctly
5.
if the flight does not performs correctly, please check
rotating direction of propellers / motors, wires connecting
receiver to flight controller
6.
hold the landing gear of the flight, lift it up, Do please
not touch any motor or propeller during this procedure
7.
push throttle up to 20%
8.
title the flight in aileron/elevate/rudder direction to see
whether the flight can level all by themselves
9.
If the flight can not get level themselves, please check
connecting wire of flight controller, rotating direction of
motors and propellers
10.
After all these checked, we are ready to fly
