10
upside instructions should be strictly followed step by
step. Incorrect operation order may make the flight out of
control and cause accident.
6.1
Turn on motors without propeller
1.
After we connect all electronic devices, power up flight
controller before we fasten propellers
Put throttle stick down to lowest position.
2.
Power up the flight, and turn on motors
3.
Check out whether motors rotate well and in right directions.
If any motor rotates in wrong direction, power off and just
exchange 2 of 3 power wires to correct it
4.
Make sure motor speed varies according to sticks movement.
5.
after all these checked, power off the flight
6.2
Control mode switch
Choose one 2-position switch of transmitter, connect the
corresponding channel of receiver to Channel M of flight controller.
This switch is used to exchange between manual mode and auto-level
mode
For 2-position switch, position 1 is manual mode, position 2 is
auto-level mode. Or u may exchange these 2 position definition.
