6
Shortcut Key Guide
Activate the
Activate the
Activate the
Signal Input Selection menu.Use
◄
◄
and to navigate and M to select the source.
ine of Sight feature. Further press to cycle between the colors or turn off.
ECO Mode feature.Further press to cycle through the presets.
INITIAL SETUP
Connect the monitor to a power outlet.
1. Press the POWER button on the monitor or to turn it on (The indicator will be blue).
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected.
3. To change between inputs, press the “Source” button to enter the source menu. Use the
“ ”and“ ” buttons to choose the input source between
Auto Select,
DP1,DP2 and HDMI.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is
separated into the following sub menus: Picture Settings, Image Settings, Colour Temperature, OSD Settings,
Reset, and M iscellaneous options, details of each menu can be found in the following section.
DP2
DP1
HDMI
