5.
Brush the filter with a small brush or wash it
in lukewarm water without any detergent or
similar.
6.
Allow the filter to dry completely, replace it
on the upper section by turning it clockwise,
refit the upper section on the lower section,
and insert the dust container back into the
vacuum cleaner. Press down until you hear a
click.
Motor protection filter
The motor protection filter is
the detachable filter pad
located beside the dust
container. It should be
removed from time to time
and, after brushing off any
dust, cleaned using water
and a small amount of mild
detergent. Allow the filter to
dry completely and replace it.
Exhaust filter
This exhaust filter should also
be cleaned regularly to
maintain suction power.
Press the release button on
the filter holder on the back
of the vacuum cleaner.
Remove the filter and clean
it, or replace the filter. If you
use water to clean the filter, it
must be completely dry before being replaced in
the vacuum cleaner.
TRANSPORT AND STORAGE
•
You can lift and carry the vacuum cleaner
using the carrying handle (10). Never pull or
lift the vacuum cleaner by the cord.
•
Before putting the vacuum cleaner away,
rewind the cord. Switch off at the socket,
unplug, and press the automatic cord rewind
button (11) until the cord is fully rewound.
•
To save space, the vacuum cleaner can be
stored upright on its end cover.
CLEANING
•
Clean the vacuum cleaner by wiping it with a
damp cloth.
•
You must not use any form of solvent, or
strong or abrasive cleaning agent.
•
Make sure all filters are kept clean (see
above). Replace the filters once they become
worn or can no longer be cleaned.
ENVIRONMENTAL TIPS
When electronic products no longer work, they
should be disposed of in a manner that causes
least impact on the environment and in
accordance with any local legislation. In most
cases you can take such products to your local
recycling station.
GUARANTEE TERMS
The guarantee does not apply:
•
if the above instructions are not followed
•
if the appliance has been interfered with
•
if the appliance has been mishandled,
subjected to rough treatment, or has suffered
any other form of damage
•
if faults have arisen as a result of faults in
your electricity supply.
Due to the constant development of our products
in terms of function and design, we reserve the
right to make changes to the product without
prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing
errors.
21
740110_IM 27/09/05 14:14 Side 21
