
IDAW srl uninominale (Einpersonengesellschaft)
capitale sociale (Grundkapital) i.v. 10000 euro - registro delle imprese P.I. (UST. IdNr.:) 05173760280, CF 05173760280
Via Roma 8/I, 35010, Vigonza, Provinz Padua, Italien
www.idaw.eu - [email protected]
The drawer boxes have a slightly lower depth than the shelves and can be set up flush at the
front.
After the drawer element has been positioned in the cabinet, first place the closing strips
on the left and right on the wooden pins provided and tap them into place (Attention: in the
photos, the strips were installed outside the wardrobe, which you should do better rather
than inside the wardrobe).
The drawer module is not attached separately, but is stable due to its weight and usually
standing behind the door hinges.
The enclosed wooden dowels are only used if you install two drawer modules one above the
other. A shelf serves as the cover shelf and support for the drawer box: it is either attached
like the other shelves. This leaves a small gap between the cover shelf and the top drawer.
The shelf can also just be put on if you prefer.