IDAW srl uninominale (Einpersonengesellschaft)
capitale sociale (Grundkapital) i.v. 10000 euro - registro delle imprese P.I. (UST. IdNr.:) 05173760280, CF 05173760280
Via Roma 8/I, 35010, Vigonza, Provinz Padua, Italien
www.idaw.eu - [email protected]
– – 6 – –
Be careful with the next step! Please do it in two in any case!
Put on the top cover element with the help of a ladder. Insert the back side of the
wardrobe and the top cover into the milled groove and then slide the top cover to the left up
to the left side of the cupboard until the pins enter the holes. Now insert and tighten the
screws. Attention: If the cover cannot be pushed in, check whether both the holes and the
pins are correctly positioned as described above. If necessary first remove the cover and
correct the position of the holes and pins. See also our montage film.
– – 7 – –
Now unpack the side dividing panel of the wardrobe, assemble the two cupboard feet
(don’t forget the furniture felts) and screw in the pins on both sides. Pay attention to the
correct position of the pins and the holes.