6
PARTS IDENTIFICATION
4. RECEPTACLE
2. CONTROL PANEL
5. OVERFLOW
SENSOR
6. BLADES
9. BARREL
1. HEAD HANDLE
7. BARREL CONNECTOR
3. HEAD
10. MIN AND MAX LINES
8. BARREL HANDLE
11. POWER PLUG
4.
3.
5.
1.
6.
2.
11
CLEANING AND STORAGE
You can clean your machine with the self clean function or
manually.
Self Clean Function
1. Fill the barrel with tap water between the MIN and
MAX lines. Never add soap to cleaning function.
2. Position the machine head connector into the barrel
connector.
3. Connect the power cord to the device, and then
connect to the socket.
4. Press the JUICE/CLEAN button.
This process takes about five minutes. The machine will
beep continuously when the cycle is complete.
Manual Cleaning
1.
Disconnect the power cord from the machine and
the outlet.
2.
Do not immerse the head of the appliance in water.
3.
Use a mild dish washing soap to clean the unit, never
use abrasive cleaners as they will damage the surface.
4.
Wash the inside of the barrel with water and use the
cleaning pad to remove debris.
5.
Clean the outside of the machine with a damp cloth.
Never rinse the outside, top or bottom of the unit
with water.
Storage
Disconnect and clean the appliance. Dry all parts with a
cloth. Store in a dry and ventilated place after cleaning.
Excess humidity may reduce the life of the machine.
Never store the appliance when it is still hot or plugged
in. Do not tightly wrap the cord around the appliance.
