background image

Patent No. US 8,856,780 CA 2759622

INSTALLATION CHECKLIST

 - 1 OF 2

1

WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2

Close all vehicle doors, hood and trunk.

3

Press the LOCK button once [1x] on the 

aftermarket

 keyfob.

¨

Question 1:

 Do the doors lock?

YES: Go to next step.

¨

NO: Verify the remote programming, the RF connections and the wired door lock/unlock 

connections as illustrated in the wiring diagram, if applicable. Repeat the test and call 

technical support, if the problem persists.

4

Press the 

UNLOCK

 button once [1x] on the 

aftermarket

 keyfob.

¨

Question 2:

 Do the doors unlock?

YES: Go to next step.

¨

NO: Verify the remote programming, the RF connections and the wired door lock/unlock 

connections as illustrated in the wiring diagram, if applicable. Repeat the test and call 

technical support, if the problem persists.

5

Press the 

TRUNK release

 button once [1x] on the 

aftermarket

 keyfob if supported.

¨

Question 3:

 Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

¨

NO: Verify the remote programming, the RF connections and the wired trunk/hatch 

connections as illustrated in the wiring diagram, if applicable. Repeat the test and call 

technical support, if the problem persists.

6

Press the 

AUX 1

 button once [1x] on the 

aftermarket

 keyfob if supported.

¨

Question 4:

 Does the driver side sliding door open?

YES: 

Press the 

AUX 1

 button once [1x]

 to close the driver sliding door and go to next step.

¨

NO: Verify the remote programming and the RF connections. Repeat the test and call 

technical support, if the problem persists.

7

Press the 

AUX 2

 button once [1x] on the 

aftermarket

 keyfob if supported.

¨

Question 5:

 Does the passenger side sliding door open?

YES: 

Press the 

AUX 2

 button once [1x]

 to close the passenger sliding door and go to next step.

¨

NO: Verify the remote programming and the RF connections. Repeat the test and call 

technical support, if the problem persists.

8

Press the START/STOP button once [1x] on the 

aftermarket

 keyfob to remote start vehicle.

¨

Question 6:

 Does the vehicle remote start?

YES: Go to next step.

¨

NO: Verify the remote programming, the RF connections and check the remote start error 

codes. Repeat the test and call technical support, if the problem persists.

9

Press the START/STOP button once [1x] on the 

aftermarket

 keyfob 

to shut down vehicle.

¨

Question 7:

 Does the vehicle shut down?

YES: Go to next step.

¨

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle 

and call technical support.

10

RAP and auto light shutdown test

¨

Question 8:

  Did the radio, interior controls and headlights turn off within 60 seconds after 

remote start shutdown?
YES: Go to next step.

¨

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the 

test and call technical support if the problem persists.

11

Open hood.

12

If not already installed, affi x the mandatory orange warning sticker under the hood and 

proceed to next step.

13

Press the START/STOP button once [1x] on the 

aftermarket

 keyfob to remote start vehicle.

¨

Question 9:

 Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood 

switch, then repeat the test.

¨

NO: Go to next step.

14

Close hood.

15

Enter vehicle and close the doors.

16

Press the START/STOP button once [1x] on the 

aftermarket

 keyfob to remote start vehicle.

17

Wait for the vehicle to start.

18

Press brake pedal. 

¨

Question 10:

 Does the vehicle shut down?

YES: Go to next step.

¨

NO: The module does NOT detect the brake pedal signal. 

Press the START/STOP button once 

[1x] on the 

aftermarket

 keyfob 

to shut down vehicle, check connection as illustrated in the 

wiring diagram, if applicable, and call technical support.

19

Exit vehicle.

20

Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

www.idatalink.com

Automotive Data Solutions Inc. © 2021

HCX

PAGE 14 OF 15

• 20211105

Summary of Contents for HCX
















Reviews: