U.S. Patent No. 8,856,780
TYPE 2 - WIRING DIAGRAM - 1 OF 2
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
STEP 1
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN
BLACK 20 PIN
BLACK 6 PIN
BLACK 6 PIN
WHITE 6 PIN
WHITE 6 PIN
BLUE 6 PIN
BLACK 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO MODULE
RELAY
B (VEHICLE HARNESS)
A (VEHICLE HARNESS)
B
A
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
01 PINK/RED - CANH
02 PINK/BLACK - CANL
CAN JUNCTION CONNECTOR
CAN CONNECTORS
C1
01 CANH
02 CANL
SEE MODULE PROGRAMMING PROCEDURE - PTS
TO IDENTIFY THE REQUIRED CAN CONNECTOR.
ONCE IDENTIFIED, DISCONNECT IT FROM THE CAN
JUNCTION CONNECTOR AND CONNECT IT TO C1.
REFER TO WIRE CHART
REFER TO COMPONENT LOCATOR
IF THE REQUIRED CAN CONNECTOR DOES NOT FIT IN C1:
SEE NEXT PAGE FOR INSTRUCTIONS
CONNECT
CONNECT
www.idatastart.com
Automotive Data Solutions Inc. © 2017
IDL-IDS(RS)-BZ1A-[ADS-BZ1]-EN
PAGE 10 OF 23
• 20170124
DOC.: #35777
