U.S. Patent No. 8,856,780
CARTRIDGE INSTALLATION
1
Slide cartridge into unit. Notice
button under LED.
2
Ready for Module Programming
Procedure.
MODULE PROGRAMMING PROCEDURE - WITH KLON
1
Insert key into ignition.
2
Turn key to ON position.
ON
5
Turn key to OFF position.
OFF
15
Turn key to OFF position.
OFF
16
Module Programming
Procedure completed.
4
The vehicle’s immobilizer is
NOT detected:
For USDM vehicles without an
immobilizer, press and release
programming button and
proceed with step 14.
For CDM and USDM vehicles
with an immobilizer, verify every
wire connections and repeat
the module programming
procedure.
3
Wait, if LED fl ashes BLUE,
proceed with step 5.
If LED turns solid BLUE,
proceed with step 15.
If LED fl ashes RED three times
[3x], proceed with step 4.
6
Disconnect all connectors from
remote starter except the power
connector.
7
Disconnect the power
connector.
14
Wait, LED will turn solid BLUE
for
2 seconds
.
13
Turn key to ON position.
ON
8
Remove remote starter from
vehicle.
Æ
9
Connect remote starter to
computer.
Æ
10
Proceed with extended
programming.
11
Connect remote starter to
vehicle.
Æ
12
Insert key into ignition.
Page 34 of 35
BLADE-AL(DL)-HK4-EN
20170526
INSTALL GUIDE
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2017
Doorlock Interface
Hyundai/Kia
Doc. No.: ##39751##
